Note : for all Evo/Décor chimes – programming can only be achieved within a 5 minute time period.

Bell Push

Use a small screwdriver to twist off cover. Insert battery (CR2032, + side up).
Ensure weatherproofing is maintained when refitting cover.

Chime Units

Remove battery cover.
Insert batteries (not supplied)
When batteries are inserted chime will scroll through preset tunes.

If not, press and hold down the two buttons on the side of the chime, (marked A and B on the instruction leaflet), until chime scrolls through tunes. Now release the two buttons.

If chime scrolls through tunes before 5 seconds has elapsed, release buttons, wait 5 minutes and re try.

Wait until chime has stopped sounding completely.
Move bell push or pushes to at least 1metre away from chime.
Press bell push 1
Now press bell push 2 (if applicable)

Press button A on chime unit to select required sound for bell push 1.
Press button B on chime unit to select required sound for bell push 2. (if applicable)
Max 2 pushes.

To program two chimes follow above procedure programming both chimes together.
Or program first chime as above.
Wait 5 minutes, then program second chime as above.

You can have as many chimes as you wish as long as they are within range.